Hazard Identification and Risk Assessment for Masonry Safety

Question 1

Which type of control measure is employed to minimize the risk of falling from heights?

Accepted Answer

Engineering controls

Answer

Administrative controls

Answer

Use of personal protective equipment (PPE)

Answer

Safe work practices

Question 2

Define the hierarchy of controls.

Accepted Answer

A ranking system for control measures, prioritizing the most effective to the least effective

Answer

A set of guidelines for designing control measures

Answer

A method for assessing the effectiveness of control measures

Answer

A tool for identifying potential hazards

Question 3

What advantage does the use of personal protective equipment (PPE) offer?

Accepted Answer

Reduces the likelihood of injuries

Answer

Eliminates the need for implementing other control measures

Answer

Always serves as the most effective control measure

Answer

Can be used to mitigate any type of hazard

Question 4

What is the intended purpose of a Material Safety Data Sheet (MSDS)?

Accepted Answer

To provide information regarding the hazards associated with a chemical substance

Answer

To provide instructions for the safe handling of a chemical substance

Answer

To record the quantity of a chemical substance used on a job site

Answer

To guide the proper disposal methods for a chemical substance

Question 5

Describe the appropriate procedure for reporting an unsafe condition on a masonry job site.

Accepted Answer

Report it to the supervisor immediately

Answer

Wait until the end of the day to report it

Answer

Ignore it and hope it resolves itself

Answer

Report it to a coworker

Question 6

What is the core purpose of a Job Hazard Analysis (JHA)?

Accepted Answer

Combining all of the above elements

Answer

Identifying potential hazards associated with specific job tasks

Answer

Evaluating the level of risk posed by each hazard

Answer

Developing strategies to mitigate identified risks

Question 7

If you are experiencing symptoms of heat stress, what is the appropriate course of action?

Accepted Answer

Implement all of the above measures

Answer

Cease work and seek shelter from the sun

Answer

Hydrate yourself by drinking plenty of fluids

Answer

Cool your body with a cold shower or bath

Question 8

Which of the below is a recommended practice for minimizing slips and falls on a masonry job site?

Accepted Answer

Implementing all of the above measures

Answer

Maintaining a clean and debris-free work environment

Answer

Wearing footwear with slip-resistant properties

Answer

Using ladders and scaffolding in a safe and proper manner

Question 9

What is the initial step in conducting a comprehensive risk assessment?

Accepted Answer

Identifying all potential hazards

Answer

Determining the probability of each hazard occurring

Answer

Evaluating the severity of each hazard

Answer

Implementing control measures

Question 10

What is the initial phase in conducting a risk assessment?

Accepted Answer

Identifying the hazard

Answer

Evaluating the risk

Answer

Controlling the risk

Answer

Monitoring the controls

Question 11

Explain the distinction between a hazard and a risk.

Accepted Answer

A hazard is a potential threat, while a risk is the likelihood and severity of that threat causing harm.

Answer

A risk is a potential threat, while a hazard is the likelihood and severity of that threat causing harm.

Answer

Hazards and risks are interchangeable terms.

Answer

There is no distinction between a hazard and a risk.

Question 12

When working on a masonry construction site, what should be the foremost priority?

Accepted Answer

Safety

Answer

Quality of work

Answer

Speed of completion

Answer

Cost-effectiveness

Question 13

Which hazard is most prevalent on masonry construction sites?

Accepted Answer

Falls

Answer

Struck-by incidents

Answer

Caught-in/between incidents

Answer

Electrical hazards

Question 14

To conduct a comprehensive risk assessment, what is the initial step?

Accepted Answer

Identify potential hazards

Answer

Evaluate identified risks

Answer

Monitor identified risks

Answer

Control identified risks

Question 15

What is the primary objective of a comprehensive Job Hazard Analysis (JHA)?

Accepted Answer

To systematically identify and evaluate hazards specific to a particular task or job

Answer

To train workers on how to avoid hazards effectively

Answer

To develop comprehensive control measures for identified hazards

Question 16

Which of the following is a key advantage of conducting a thorough risk assessment?

Accepted Answer

Reducing the likelihood and severity of accidents and incidents

Answer

Improving productivity and efficiency

Answer

Boosting employee morale and satisfaction

Answer

Enhancing the overall quality of work

Question 17

What is the main purpose of a Safety Data Sheet (SDS)?

Accepted Answer

To provide comprehensive information about the potential hazards of a chemical substance and how to handle it safely

Answer

To list the chemical composition and ingredients of a substance

Answer

To provide specific instructions on how to use a chemical substance

Question 18

In the context of masonry work, what should be the guiding principle for all workers and activities on a job site?

Accepted Answer

Prioritizing safety above all else

Answer

Ensuring high-quality workmanship

Answer

Minimizing costs and expenses

Answer

Meeting deadlines and production targets

Question 19

What is the initial step in conducting a comprehensive risk assessment?

Accepted Answer

Identifying potential hazards

Answer

Communicating the risk assessment findings

Answer

Prioritizing identified hazards

Answer

Evaluating the effectiveness of control measures

Question 20

True or False: All hazards encountered on a masonry job site are considered high-risk.

Accepted Answer

False

Answer

N/A

Answer

True

Answer

N/A

Question 21

What is the primary objective of a Job Hazard Analysis (JHA)?

Accepted Answer

To systematically identify and assess hazards associated with a specific task or activity

Answer

To provide on-the-job training to workers

Answer

To create a detailed safety plan

Question 22

True or False: Risk assessment is a static process that is completed only at the initiation of a project.

Accepted Answer

False

Answer

N/A

Answer

True

Answer

N/A

Question 23

Which of the listed options is an example of an administrative control measure?

Accepted Answer

Establishing and enforcing clear work procedures

Answer

Implementing machine guards

Answer

Conducting regular inspections

Answer

Providing personal protective equipment

Question 24

What is the fundamental distinction between a hazard and a risk?

Accepted Answer

A hazard is the potential for harm, while a risk is the likelihood of that harm occurring.

Answer

Hazards and risks are synonymous.

Answer

A hazard is the likelihood of harm, while a risk is the potential for harm.

Question 25

Which of the following is considered a responsible safety practice on a masonry job site?

Accepted Answer

Using fall protection equipment when working at heights

Answer

Ignoring designated smoking areas

Answer

Not reporting unsafe conditions to supervisors

Answer

Operating heavy machinery without proper training